Quick Start Guide
www.ti.com
2
Quick Start Guide
This section provides a guide through the EVM test procedure to obtain a valid data capture from the
ADS5XJ6XEVM using the TSW14J56EVM capture card. This should be the starting point for all
evaluations.
2.1
Software Installation
The proper software must be installed before beginning evaluation. See
Required Software
,
Section 1.2
for a list of the required software.
References
Section 1.4
of this document contains links to find the
software on the TI website.
NOTE:
The software must be installed before connecting the ADS5XJ6XEVM and TSW14J56 to the
computer for the first time.
2.1.1
ADS54Jxx GUI Installation
The ADS54Jxx GUI is used to control the ADS5XJ6XEVM. It must be used to properly configure the
devices on the EVM.
1. Download the ADS54Jxx GUI from the TI website. The
References
section of this document contains
link to find the software on the TI website.
2. Extract the files from the zip file.
3. Run
setup.exe
and follow the installation prompts.
2.1.2
High Speed Data Converter Pro GUI Installation
High Speed Data Converter Pro (HSDC Pro) is used to control the TSW14J56EVM and analyze the
captured data. Please see the HSDC Pro user’s guide for more information.
1. Download HSDC Pro from the TI website. The
References
section of this document contains the link to
find the software on the TI website.
2. Extract the files from the zip file.
3. Run
setup.exe
and follow the installation prompts.
4
ADS5XJ6X Evaluation Module
SLAU641D – June 2015 – Revised January 2016
Submit Documentation Feedback
Copyright © 2015–2016, Texas Instruments Incorporated