14
Never let the machine run unattended. Disconnect the power when you leave the
machine.
Stop the engine when adjusting, changing parts or repairing the machine.
Do not wear any jewellery or loose clothing that could be snagged by the log
splitter.
The pressure must not be adjusted.
The user shall operate the log saw with both hands.
Never split two logs at once, they can tilt and create danger.
Never place a new log on the machine before you ve finished the previous as this
can be very dangerous.
Draw attention to the blade always being sharp, replace when necessary.
El motor
It is important that the saw is connected to a corresponding current, as described on the
machines type tag.
If the cord is less than 25 meters the copper cross section must be minimum 1,5mm
2
. If
the cord is more than 25 meters the cross section must be minimum 2,5mm
2
. Note,
however, that there may be national differences with regard to type of plug. Therefore
check that the plug which is being used respects the demands of your country s legislation
concerning earth connection. A 16 Ampere fuse shall be used.
Motor brake
The electric motor is equipped with a motor brake which automatically shuts the motor off
at overload.
