Tevion STB7017, Instruction Manual

Page: 8 / 26

CHANNEL
STB 7017
6 6
Front Panel and Rear Panel Illustration
1. Front panel
1 RF IN : This socket connects to your external aerial.
2 RF LOOP THROUGH: This socket will bypass the RF signal to either your TV or another
video system.
3 COAXIAL: This socket connects to a coaxial socket on your surround sound system.
4 VCR SCART: This socket connects to either a DVD or other video system.
5 TV SCART: This socket connects to your TV.
6 RS-232 PORT: This socket is only used for software upgrade.
7 MAINS CABLE: This is used to connect to your main power supply.
1 POWER BUTTON: Used to switch the set top box on and off.
2 Standby Indicator: Used to visually show power state of the set top box, the green
LED will show if turned on the set top box and the red LED will be light if the set top box
entered standby mode.
3 REMOTE CONTROL SENSOR: Used to receive the signal from the remote control.
4 CHANNEL UP/DOWN: Used to change channels without using the remote control.
3 4
IN IN R R F F
LOOP LOOP R R F F
THROUGH THROUGH
Coaxial Coaxial
Digital
Audio Digital
Audio
VCR O O VCR O O TV TV
Serial No.:
DIGITAL TERRESTRIAL RECEIVER
POWER SUPPLY: 100-240V~ 50/60Hz
MAX POWER CONSUMPTION: 10WATTS
MADE IN CHINA
100-240V~
50/60Hz
SERVICE
STB 7017