Problem
The standby
light
not
l
it
After moving the
receiver to an
o
ther
room,
can’t receive
digital
reception
Possible Cause
Mains lead unplugged
Aerial is disconnected
Aerial is damaged/
misaligned
What to do
Check mains lead
Check aerial lead
Check aerial
The aerial feed may come
through a distribution
system which may reduce
the digital signal now
received by the receiver
Try a direct feed from the
antenna
No signal found
Out of digital signal area Check with dealer
No picture or sound
Tuned to digital teletext
channel
Retune to another
channel
Mosaic blocks in picture
or picture freezes
Aerial may not be
compatible
/or damaged
Check aerial
Scrambled channel
message
Channel is scrambled
Select an alternative
channel
Forgot
t
en channel lock
code
Re-install channels to
Cancel channel lock
No response to remote
control
Receiver off
Handset not aimed
correctly
Front panel obstructed
Remote control batteries
are inserted incorrectly
Handset batteries
exhausted
Plug in and turn on receiver
Aim handset at front panel
Check for obstructions
Check batteries direction
Replace remote control
batteries
13. Trouble
shooting
13
After Sales Support
TEL:1300 886 649
Troubleshooting
If you experience problems with this receiver or its intallation,please read carefully the relevant
sections of this User Manual and this Troubleshooting section.
