After Sales Support
TEL:1300 886 649
DVD OPERATIONS
8.3 Audio setup
Select Audio in the setup menu .
7
8.2.4 Video Out
Selecting the Video Output setting to switch between different video outputs.
S-Video:
Set the video output to S-Video output.
Component:
Set the video output to interlacing component output.
P-Scan:
Set the video output to progressive component output.
8.2.3 TV System
This product supports output of various system
s
,including Auto,NTSC,PAL.If your TV set has
only NTSC or PAL system,the screen will blink and become colorless when a wrong system is
select
e
d.
Note:For more information of output format,refer to the instructions or your TV set.
(PAL is the standard for Australia)
8.3.1 Bass Management
To enable or disable the Bass Management during operation of the player.
On = Enable the Bass Management.
Off = Disable the Bass Management.
HOME
THEATRE
SETUP
8.3.2 Front Speakers
To adjust the front speakers output to work in harmony with the audio equipment
(e.g.receiver, speakers) connected to the player.When Bass Management is On, the
following options are available:
Large :
Support signal frequency lower than 200Hz.
Small :
Support signal frequency higher than 200Hz.
If the connected speaker supports signal lower than 200Hz, it is best to select large;
If not, you shall select Small.
8.3.3 Center Speaker
Selection of Large or Small is same with that of front speaker. The speaker will have
no signal output if set to None.
Notes:
If the Subwoofer is On, Center is set to None or Small, and bass from the center
channel
is redirected to the subwoofer. If the content contains a discrete subwoofer
channel, it is also sent to the subwoofer. If the Subwoofer is Off, Center is set to
None or small, and bass from the center channel is redirected to the left and right
channels. If the content contains a discrete subwoofer channel, it is discarded.
8.3.4 Surround Speakers
Selection of Large or Small is same with that of front speaker. The speaker will have
no signal output if set to None.
