TEUFELBERGER treeMOTION, Manufacturer'S Information And User Instructions

Page: 9 / 80

9
Check that the waist belt and leg loop buckles are undone (1, 9)
2.4. HOW TO PUT ON treeMOTION ...
a) Hold the harness
by the back support b) Step inside the
rope bridge (10) and
the leg loops (17) c) Securely close the
waist belt buckle (1) d) Securely close the
leg loop buckles (9)
1) Adjust waist belt webbing (1) and stow the end under the elastic loop.
2) Adjust webbing in each leg loop (17) and stow the end under the elastic loops.
3) Adjust webbing in the adjustable links (5) and stow the end under the elastic loops
4) Adjust the length of the rope bridge (10) ensuring the stopper knots are properly tied,
dressed and set before going ‘on rope’
2.5. ... AND OBTAIN A GOOD FIT
IV
I II III
III
III
II
II
I
The climber shall fully equip the harness for the task to be performed, then hang in suspension
and adopt a range of work positions to ensure that the harness is properly fitted, comfortable
and suitable for the task. Leg and back paddings are attached to the harness by hook-and-
loop fastener and can be removed for cleaning and put back in place.
pic. 2 pic. 3 pic. 4 pic. 5
pic. 6 pic. 7
USE