TEUFELBERGER treeMOTION, Manufacturer'S Information And User Instructions

Page: 14 / 80

14
Drying
Hang in well ventilated space (
≤
30C) Direct sunlight
Applied heat (e.g. fire)
Disinfection
Water (
≤
30°C) Duration (
≤
1 hour)
Ethanol Rinse after disinfection
Corrosive substances
Keep away from corrosive acids, bases, liquids, vapours, gases etc.. If you think damage has
occurred as a result of contact with an agressive substance:
1. Quarantine the product and label it in an obvious way so that it can not be used by mistake;
2. Send as much detail as possible about your concerns to the manufacturer;
3. Do not use the product again unless the manufacturer replied (in writing) that it may be
returned to service.
Checking the equipment at regular intervals is absolutely necessary: your safety de-
pends on the effectiveness and durability of the equipment!
Following each use, the product should be checked for abrasion and cuts. Also check it for the
X
X





8. REGULAR CHECKS
TRANSPORT, STORAGE & CLEANING /
REGULAR CHECKS
The load-bearing parts of the harness are made of
Polyester, Polyamid, Aluminium, Dyneema
®
Operating temp range
+50°C to -30°C
Storage and transportation conditions
Compaction Nibbling pests
Ventilation Excessive moisture
UV radiation +15°C to +25°C
Dry and clean environment Sharp edged objects
Maintenance/Cleaning
Water ( ≤ 30°C) Machine washing
Mild detergent Pressure washer
Gentle hand washing
7. TRANSPORT, STORAGE & CLEANING


X
X
X
X
X
X
X





X ... OK
X ... not OK
