SPeAkeR leVel outPut
FRoNt SPeAkeR
RigHt
+
–
FRoNt SPeAkeR
leFt
+
–
ReAR SPeAkeR
RigHt
+
–
ReAR SPeAkeR
leFt
+
–
CeNtRe
+
–
FRoNt
leFt
+
FRoNt
RigHt
ReAR
RigHt
CeNtRe
ReAR
leFt
+
+
+
+
–
–
–
–
–
CoNNeCtoR PANel,
SuBwooFeR
ReAR SiDe
10
·
Motiv 5
Connecting the satellites
For connecting the satel-
lites cut the cable to the
required lengths. Strip
the plastic coating from
the ends of the speaker cables (as shown). The
speakers and amplifier have corresponding [+]
and [–] terminals. The [+] cable of the speaker ca
-
ble is marked with a stripe. It is important that
you observe the correct polarity when connect
-
ing the speakers: the plus pole of the speaker to
the plus pole of the amplifier and the minus pole
of the speaker to the minus pole of the ampli
-
fier. Connecting the cables with the incorrect
phases can result in thin sound, weak bass and
reduced stereo characteristics. For multichannel
surround systems, it is also important that all
speakers are connected with the correct polarity
in order to ensure an appropriate three-dimen
-
sional atmosphere and the correct alignment of
the sound.
Connect the speakers to the correspondingly
marked clamp connections on the rear of the
subwoofer; i.e. the front left speaker to FL and
the rear left speaker to RL and so on.
Connection: Satellites
