Teufel CP 5100 DR, Technical Description And Operating Instructions

Page: 24 / 28

24 • CP 5100 DR
There are numerous parameters in the menu functions,
which may impair or even prevent normal operation. If
your DVD receiver is behaving “unusually”, you can reset
the device to the factory settings. This resets parameters
such as speaker size or level to the default values.
To reset all parameters to the factory setting:
Press the button 1. 50 “DVD” to select “DISC” as source.
Press the button 2. 51 “Setup”. The main menu is shown
on the screen.
Select the submenu “System” with the navigation but-
3.
tons 40 “
▲▼
” and press the select button 41 “
●
”. The
submenu will open.
Select the item “SW Version” with the navigation but-
4.
tons 40 “
▲▼
” and press the select button 41 “
●
”. The
submenu will open.
Select the item “
5. Reset” with the navigation buttons 40
“
▲▼
” and press the select button 41 “
●
”. The display
will fl icker briefl y.
Turn off the device with the power switch
6. 23 “Power”
on the back.
Wait approximately 10 seconds before turning the
7.
device back on.
40
41
Problem Possible cause Solution
No or distorted music
playback. The fi les on the data storage device are
not in MP3 or AAC format. Delete fi les with the wrong format.
File damaged. Delete or skip the fi le.
Remote control is not work-
ing. No line of sight between the remote con-
trol and the device. Remove any obstacles.
The remote control is not pointed properly. Point the remote control at the device.
Batteries inserted in the remote control with
wrong polarity.
Insert the batteries the right way around (see
diagram on the battery compartment).
Batteries in the remote control are empty. Insert new batteries.
23
50
51
91341 GB 20100924.indd 24 91341 GB 20100924.indd 24 24.09.2010 9:58:11 Uhr 24.09.2010 9:58:11 Uhr