background image

24

CONNECTIONS FOR VARIOUS MODELS

GB

A6 - Connection for hose 3 (drainage).
N . B . :   H o s e s   1   a n d   2   f o r   t h e
decalcification system must always be
filled with water. Therefore, this
system must not be emptied during
installation.

CA - Electrical connection for the

IPX4 sauna (box with PG13.5
cable clamp ).

C

F

3

CA

P

N

A3

2

5

4

1

8

10

A4

D

4

A5

A6

D

3

3

A2

D

10

10

8

8

D

5

2

1

A1

9

Art. 122R (EASY)

- Easy Multifunction Shower Box with 2 Climates Steam Sauna

O n c e   t h e   p l u g s   ( D )   h a v e   b e e n
removed, they should not be used
again.

C - Hot water connection.

Use a 90 cm flexible stainless
steel hose.

F - Cold water connection.

Use a 90 cm flexible stainless
steel hose.

A1 - Connection for hoses 1 and 2 for

the sauna unit and for hose 5 for
the shower head with nebulizer.

A2 - Connection for hose 8 for the

vertical massage and for hose 10
for the back massage.

A3 - Cleaning of the taps with filter.

A4 - C o n n e c t i o n   b e t w e e n   t h e

electrical cable coming from the
dome and cable coming from the
power unit.

A5 - Connection for hose 4 (boiler).

Blue
Yellow-Green
Brown

Summary of Contents for 122R











Reviews: