20
ASSEMBLING THE CABIN
GB
A
C
M5X20
Ø5
4,2x60
Ø5
C2
M
M3x8
Ø4
C1
C1
B
C
C1
C
4,2x60
Ø5
A
M5X20
Ø5
Fit the rubber doorstop (M) onto
the panel (B) and fasten it with the
screw and washer (C3).
Remove the screw from the end
piece on the bottom track.
Apply silicone to the end of the
track at the point indicated.
P o s i t i o n t h e p a n e l ( B ) o n t h e
shower base and fasten it to the
track with the screw and washer re-
moved earlier (C).
Insert the screws and washers (C1)
into the frame of the back shower
panel and into the shower base
without tightening them.
3
3a
ASSEMBLING THE BACK
PANELS
Place drain cover on the drain in
the shower base.
Move the shower base away from
the corner in order to proceed with
the subsequent assembly steps.
Remove the screws (C1) from the
end of the bottom track.
Apply silicone to the end of the
track as shown in the diagram.
Place the back panel (A) with the
seat onto the shower base and in-
sert the support onto the end of the
bottom track.
Fasten the panel (A) to the track
with the screw and washer (C1) re-
moved earlier.
Insert the screw and washer (C1)
into the back panel to fasten it to
the shower base.
Bag (C) - plastic accessories
