21
ASSEMBLING THE CABIN
GB
B
B1
C
M5
Ø5
C
A
B
C3
M5x25
Ø5
M5
Ø5
C1
C1
C1
INSTALLING THE SIDE
PANEL
Apply silicone to the groove in the
track in the area corresponding to
the position of the side panel and
end cap.
Slide the side panel (B1) into the
bottom track.
Position the threaded pins on the
support for the side panel (B1) so
that they match up with the holes
on the back panel (B); if necessary,
use a 2.5 Allen wrench.
Check that the seal (!) fits properly
along the entire length of the side
panel (B1) support.
Fasten the side panel (B1) to the
back panel (B) by tightening the
nuts with washers (C).
3b
Fasten the panels (A) and (B) to-
gether with the screws, nuts and
washers (C3).
Tighten the screws (C1) which have
already been inserted into the
shower base.
Consult the attached manual for in-
structions on how to install the
taps.
4
Bag (A) - screws for phases 4-5
