27
ASSEMBLING THE CABIN
GB
C
C5
4,2x38
Ø5
C1
T1
M5x16
Ø5-M5
C
M5
Ø5
P
T
C2
C2
M5
Ø5
M5x20
M5-Ø5
C4
M5x20
M5-Ø5
C4
C3
13
Bag (B) - screws for step 13
FIXING THE SHOWER TO
THE WALL
Position the shower cabin against
the wall.
To fasten the unit, lift the sauna
dome and place a spacer between
the track and the dome itself.
Insert the bracket (T) into the plate
(P), which has already fastened to
the wall, and onto the screw (C) on
the shower cabin.
Tighten the bracket (T) with the
nut and washer (C2).
Move the shower cabin next to the
wall, position the bracket (T1) on
the frame, drill a hole in the wall,
insert the screw with the fischer
and fasten the bracket (T1) to the
frame, tightening the screw with
the washer (C1).
Remove the spacer and center the
dome on the shower cabin (see fig.
8).
O p e n t h e t o p o f t h e d o m e b y
removing the screws (C3); fasten
the bottom of the dome with the
nut and washer (C2) onto the screw
(C) located on the shower cabin.
Repeat this last procedure on the
other side with the other nut and
washer (C4).
Close the top of the dome and
fasten in place with the screws
which were removed earlier.
Fit the side panel by sliding it
down from the top so as to hook it
onto the support brackets on the
frame.
Fix the side panels by tightening
the towel-knob with the screws and
washers (C3); insert the trim.
