4 Transmitter
76
10.
Continue to
Main Menu Ident
with
X
or
S
or return to
Measuring Mode with
ESC
.
An overview of the messages can be found in Status,
warning and error messages, page 79
Pos: 76 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Ident abfragen 638x @ 3\mod_1234526997731_79.doc @ 25417 @ 4
4.4.6.8.
Calling up Main Menu Ident
1
Instrument or
probe type
2
Build number
3
Firmware
version
4
Serial number
The serial numbers of the transmitter and probe can be read off.
1.
In the Measuring Mode press
SET
, select
Main Menu Ident
with
X
or
S
and confirm selection with
SET
.
-
The type, firmware version, build number and serial number of
the transmitter are displayed.
This information is required when servicing.
2.
Return to
Main Menu Ident
with
ESC
or read off the type,
firmware release, build number and serial number of the probe
with
X
or
S
and then return to
Main Menu Ident
with
X
or
S
.
3.
Continue to
Main Menu Adjust
with
X
or
S
or return to
Measuring Mode with
ESC
.
Pos: 77 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Abgleich bearbeiten 638x @ 3\mod_1234528055751_79.doc @ 25436 @ 4555
4.4.6.9.
Editing Main Menu Adjust
A reference value can be entered for both relative humidity (RH)
and temperature (°C/°F) for the 1-point adjustment. Please refer to
the description in 1-point adjustment (offset -
humidity/temperature), page 51
Reference values for pressure can be entered for the n-point
adjustment. Please refer to the description in n-point adjustment
(pressure), page 56
1.800.561.8187
www.
Testo-Direct
.ca
All manuals and user guides at all-guides.com
