4 Transmitter
24
2.
Insert screw (
4
) through hole (
3
) and screw into rear panel
bracket.
3.
Insert probe connector (
5
) into socket until it engages.
Pos: 42 /TD/Erste Schritte/MUF 63xx/Kanalmontage @ 3\mod_1234778800983_79.doc @ 25859 @ 4
4.3.2.2.
Duct mounting (for testo 6612 probes)
1.
Hold wall/duct bracket (order no. 0554 6651) (
6
) against duct
wall (
8
) and mark drill holes for wall/duct bracket and probe
shaft.
2.
Drill a hole (Ø 12.5 mm) in the duct wall to feed through the
probe shaft.
3.
Fasten wall/duct bracket (
6
) to duct wall with screws (
5
).
4.
Push probe shaft (
9
) with filter (
10
) through the middle hole of
the mounting bracket.
The wall/duct bracket (
6
) has an O-ring (
7
) to seal it against
the duct. Feed the probe shaft (
9
) carefully through the
wall/duct bracket so that the O-ring is not damaged.
1.800.561.8187
www.
Testo-Direct
.ca
All manuals and user guides at all-guides.com