TESTO 6321, Instruction Manual

Page: 18 / 40

5 Parameterizing, adjusting and analyzing software (P2A software)
18
5 Parameterizing, adjusting and analyzing
software (P2A software)
Pos: 36 /TD/Überschriften/MUF/1.1/2.1/3.1 Leistungsbeschreibung @ 3\mod_1234258595211_79.doc @ 23951 @ 2
5.1. Specifications
Pos: 37 /TD/Leistungsbeschreibung/Verwendung/MUF63xx/MUF 63xx P2A @ 3\mod_1234258967326_79.doc @ 24065 @ 355
The P2A software is used for the parameterization, adjustment and
analysis of Testo transmitters. The following applies:
• If a Testo transmitter is bought at a later stage (and is therefore
more recent than the existing P2A software version), a software
update is required.
• You can find the free upgrade on the Testo website
www.testo.com under the product-specific downloads.
The software therefore only needs to be bought once, even for
owners of several Testo transmitters.
5.1.1. Functions and use
In the P2A software, two different file types are used: The
instrument and the parameter file.
Instrument file
The parameters of a particular transmitter are stored in its so-called
instrument file. Using this file, the parameters can be edited and the
instrument can be tested and adjusted.
Instrument files also contain the respective histories in addition to
the parameter data, i.e. "log books" are kept for the previous
parameterizations, adjustments and messages (see Transmitter
history page 34).
Instrument files are ".cfm" format files.
Parameter file
Parameter files are not tied to a specific individual transmitter and
contain only parameter data/no history data.