Vibrating Table
2.0231 / 2.0268 / 2.0269
2.0131 / 2.0233 / 2.0234
2.0271
4
The manufacturer accepts no liability for any damage caused by incorrect use of
the system.
Changes reserved: The manufacturer retains the right to change the technical de-
scriptions as well as the system to which they relate without advance notice.
This operating manual contains safety instructions that are to be observed in order to
exclude any risk of fatalities, injuries, damage to the equipment or improper operation.
Safety markings are as follows:
Caution!
This warning refers to dangers that could cause material damage.
Danger
This warning refers to dangers that could cause severe injuries or
even fatalities.
Note
Provides practical advice on operation
1.3 Conditions under which this Vibrating Table may not be used
This Vibrating Table is not designed for operation under the following conditions, and may
therefore not be used in such cases:
The Vibrating Table must not be used on a surface that is not level. And on a surface
that cannot safely support its weight or the forces that it produces.
The Vibrating Table may not be subjected to unbalanced loads or weights (i.e., loads
or weights only on one side).
The Vibrating Table may not be used under dangerous, adverse, or any other unfa-
vourable conditions.
Persons must not step or stand on the table while it is in operation, or while it is shut
off.
1.4 Guarantee
Our
General Terms of Sales and Delivery
apply in all cases.
The Manufacturer guarantees that this Operating Manual has been prepared in conform-
ity with the technical and functional parameters of the machine as delivered. The Manu-
facturer reserves the right to add supplementary information to this Operating Manual as
required.
