TESTING 1.0206.01, Operating Instructions Manual

Page: 8 / 57

Laboratory mortar mixer
1.0206.01
8
3.5. Danger when handling the mortar mixer
The mortar mixer is built according to state-of-the-art and recognised technical rules.
Nevertheless, danger to the user's life or that of third parties or damage to machine parts
or other property may occur during its use.
The mortar mixer is only to be used

for the intended use

and in a flawless condition in terms of safety.
Any faults that may affect safety must be immediately resolved.
4.
Basic notes
4.1. Intendend use
This description contains the necessary information for the intended use of the products
described therein. It is intended for technically qualified personnel. The operator must
clearly establish the area of responsibility of their personnel.
Qualified personnel are persons who have been authorised by the person responsible for
the safety of the machine to carry out the necessary activities due to their training, expe-
rience, instruction and knowledge of relevant standards, regulations, accident prevention
regulations and operating conditions, thereby being able to recognise and avoid possible
dangers (Definition for qualified specialist according to IEC 364).
The requirements and limit values stated in these operating instructions, as well as the
safety instructions provided, must be complied with. Any use beyond this scope shall be
considered to be an intentional misuse. If special work practices or conditions are re-
quired, the manufacturer's consultation and approval should be acquired.
The manufacturer accepts no liability for damages caused as a result of a failure to ob-
serve these "safety and operating instructions".
The mortar mixer is used exclusively for the mechanical mixing of mortars and cement
paste for the production of test specimens according to different standards.