TESTING 1.0206.01, Operating Instructions Manual

Page: 44 / 57

Laboratory mortar mixer
1.0206.01
44
16. Copyright
The copyright remains with the company
TESTING Bluhm & Feuerherdt GmbH
These operating instructions are only intended for the operator and their personnel. It
contains guidelines and indications which may not be

reproduced

distributed or

otherwise disclosed.
Violations can result in prosecution.
17. Address of the manufacturer
TESTING Bluhm & Feuerherdt GmbH
Motzener Str.26b
12277 Berlin
Tel.: 030 / 7109645-0
Fax: 030 / 7109645-98
E-mail: info@testing.de
18. Cleaning and maintenance
18.1. Cleaning the mortar mixer
If external cleaning of the mortar mixer is necessary, depending on the frequency of use
or ambient conditions, proceed as follows:
1. Turn off the MAIN SWITCH, position "-0-"
2. Disconnect the mortar mixer from the mains supply
3. Remove any loose dust using a brush or suction
4. If necessary, the mortar mixer can be cleaned externally
with a damp cloth.
Normal household cleaners can be used as aids.
Caution
Any cleaning with pressure, spray or gushing water, as well as water
being introduced with dripping sponges or similar unsuitable aids, re-
sults in sustained damage to mechanical and/or electrical or elec-
tronic components of the mortar mixer.