TESTING 1.0206.01, Operating Instructions Manual

Page: 32 / 57

Laboratory mortar mixer
1.0206.01
32
9.9.3. Finish working with the variable speeds
Pos.
description
1. Press F1 to access the service menu, where you can switch to normal-
ized speeds.
9.9.4. Setting the normalized speeds
1. The setting is made in the service menu
2.
Press F2 , using the up

or down symbols

, select the appropriate
speed setting function.
3. Activate the setting functions by pressing F3 (flashing background indi-
cates activity) and select the desired function with F2 or F1 .
fixed = standardized speeds
4. Press F3 and take over the selection.
(Background permanently black)
5. Press F4 twice to switch to the work menu.
6. After pressing F4 , the work menu is displayed.
9.10. Setting the signal
1. The setting is made in the service menu
2.
Press F2 , using the up

or down symbols

, select the appropriate
setting function for the signal.
3. Activate the setting functions by pressing F3 (flashing background indi-
cates activity) and select the desired function with F2 or F1 .
on or off
4. Press F3 and take over the selection.
(Background permanently black)
5. Press F4 twice to switch to the work menu.
6. After pressing F4 , the work menu is displayed.