Man_8000_0120
www.testec.de
4
1 Introduction
Overview
The TT-SI 8000 differential probe series allows safe, accurate measurement between
two voltage points where neither point is referenced to ground. The probes are
designed for high sensitivity measurements up to 200 MHz bandwidth and up to
7000V differential voltage. The probes are compatible with oscilloscopes from all
major manufacturers.
Features
•
Meets IEC 61010-1:2015 safety standard
•
Selectable attenuation settings
•
Offset setting function
•
5 MHz bandwidth limit function to remove noise and interferences.
•
Overrange sound & light alarm
•
High accuracy (±2%)
•
Powered through USB or USB to mains adapter
•
Over range indicator LED
Initial Inspection
This unit is tested prior to shipment. It is therefore ready for immediate use upon
receipt. An initial physical inspection should be made to ensure that no damage has
been sustained during shipment. After the inspection, verify the contents of the
shipment.
Delivery Content
•
1 x differential probe - TT-SI 8000 series
•
2 x pincer clips, black & red – TT-SI GR82
•
2 x hook clips, black & red – TT-SI GR81
•
2 x alligator clips, black & red – TT-SI CR81
•
2 x alligator clips, black & red – TT-SI CR82 (TT-SI 8010A & B instead of CR81)
•
2 x 4mm test leads, black & red – TT-SI TL8
•
1 x insulated BNC cable, 100 cm – TT-SI BN8
•
1 x USB power cable, 150cm – TT-SI USB8
•
1 x USB power adapter 5V/1A – EU version – TT-SI NT8
•
1 x User manual
