Man_8000_0120
www.testec.de
2
Not for Critical Applications
This probe is not authorized for use in contact with the human body or for use as a
component in a life-support device or system.
Do Not Substitute Parts
Do not install substitute parts or perform any unauthorized modification to the
instrument.
Only Qualified Personnel
Only qualified personnel should use this probe. This differential voltage probe is
designed to be used by personnel who are trained, experienced, or otherwise
qualified to recognize hazardous situations and who are trained in the safety
precautions necessary to avoid possible injury when using such a device.
Observe Maximum Working Voltage
Do not use any probe above its maximum working voltage ranges. See
specifications on page 7.
Use Proper Power Source
Do not operate this probe from a power source that applies more than the voltage
specified.
Must be Grounded
This probe is grounded by the shell of the BNC connector through the grounding
conductor of the power cord of the measurement instrument. Before making
connections to the input leads of this probe, ensure that the output BNC connector is
attached to the BNC connector of the measurement instrument, and that the
measurement instrument is properly grounded. Whenever it is likely that the ground
protection is impaired, you must make the instrument inoperative and secure it
against any unintended operation
.
Terms and Symbols
The following symbols appear on the product or in its documentation:
Direct voltage
Both direct and alternating voltage
Caution, possibility of electric shock
Caution, see documentation for details
Earth Ground
