4.2
Hardware Functions
4.2.1 SW1
Bit1-5 of SW1 is Dip switch for operation mode setting.
Bit6-8 are the Dip switch for general-purpose ports that connected to P80-P82.
●
For the use of ID78K0R-QB, use following settings.
SW1
Bit 1
ON/OFF
※
1
Bit 2
ON
Bit 3
ON
Bit 4
OFF
Bit 5
OFF
※1 ON:
The microcontroller stays being reset until ID78K0R-QB is started.
OFF:
The microcontroller runs the programs stored in the flash memory as
soon as it gets power supply.
※2
If you use ID78K0R-QB, it uses P40 and P41 for communicating with host
machine. Therefore, you cannot use P40 and P41.
●
To run the programs stored in built-in flash memory without using ID78K0R-QB,
use following settings and re-supply USB power.
You can use the On-chip debug function with connecting a MINICUBE2.
SW1
Bit 1
OFF
Bit 2
OFF
Bit 3
OFF
Bit 4
OFF
Bit 5
OFF
- 80 -
