3). Please set the transmitter board as follows,
JP1
1-2 short (USB side)
Bit1
OFF
Bit2
OFF
Bit3
OFF
Bit4
ON
Bit5
ON
Bit6
OFF for address setting
Bit7
OFF for address setting
SW1
Bit8
OFF for the Hyperterminal mode
This example is for the short address of 0001.
This board is designated as the transmitter.
Then, please connect it to your second PC with a USB cable.
Then, please identify the COM port number of the USB in your PC
at [Control Panel]
Æ
[System]
4). Hyper Terminal
On MS-Windows in your PC, please select [All Programs] -> [Accessory] ->
[Communication] -> [HyperTerminal]
Setting of Hyperterminal
Bits per second
115200
Data bits
8
Parity
None
Stop bits
1
Flow control
None
(Property -> Setting -> ASCII)
Local Echo OFF
No Line Feed
- 66 -
