TESOR PLUS CORP. TR06CC, User Manual

Page: 14 / 21

14
FEATURE “C” PROGRAMMING
- turn off ignition
- press override button 3 times
- turn on ignition
- parking lights flash and siren chirps 3 times
- push the Valet Switch 5 times.
- one long chirp with 5 short chirps is heard.
You are now in the start feature “C” programming mode.
- press and release the transmitter button corresponding
to the feature you want to program.
Exit feature programming: After 20 sec or turning off ignition system will get out the feature
programming setting procedure, parking lights flash 4 times.
Press
Transmitter
Button one chip
LED 1 pulse
Default setting two chip
LED 2 pulse three chip
LED 3 pulse four chip
LED 4 pulse
C1
CH1
For trunk release
each output 1s
when active. CH1
for channel output
each output 30s
when active. CH1
for channel output
=latched output CH1
for channel output
= latched output
and reset with
IGN on
C2
CH2
for 2
nd
Unlock
Hold button 2
2second to active
CH2
for 2
nd
Unlock
Press button 2
2 times to active
CH2
for OEM
DISARM CH2
for channel output
each output 30s
when active.
C3
CH3
For dome light CH3
for channel output
= latched output
and reset with
IGN on CH3
for channel output
each output 1s
when active. CH3
for channel output
each output 30s
when active.