TESOR PLUS CORP. TR06CC, User Manual

Page: 15 / 21

15
C4
CH4
For Car HORN
output CH4
For window close
Each output 1s ,
When arming . CH4
for OEM
REARM CH4
for channel output
each output 30s
when active.
FEATURE “D” PROGRAMMING
- turn off ignition
- press override button 3 times
- turn on ignition
- parking lights flash and siren chirps 3 times
- push the Valet Switch 7 times.
- one long chirp with 7 short chirps is heard.
You are now in the start feature “D” programming mode.
- press and release the transmitter button corresponding
to the feature you want to program.
Exit feature programming: After 20 sec or turning off ignition system will get out the feature
programming setting procedure, parking lights flash 4 times.
Press
Transmitter
Button one chip
LED 1 pulse
Default setting two chip
LED 2 pulse three chip
LED 3 pulse four chip
LED 4 pulse
D1
CH5
For ACC output CH5
for channel output
=30s pulse CH5
for channel output
= latched output
and reset with
IGN on CH5
for channel output
=1s pulse
D2
CH6
For IGN3 output CH6
for channel output
=latched output CH6
for channel output
= latched output
and reset with
IGN on CH6
for channel output
= 1s pulse
D3
Trunk pop no
disarm Trunk pop with
disarm