9
Pin-code consists of two digits. To disarm system with out remote transmitter or deactivate
Anti-hijack mode use PIN-code procedure.
Pin-code consists of two digits: X, Y. Factory default 1:1 (X=1, Y=1)
To disarming:
- turn ignition ON
- press override button (X) times
- turn ignition OFF then ON
- press override button (Y) times
- turn ignition OFF
After that system disarms.
Note: System will automatically get out of PIN-code procedure if no pressing within 20 sec after
last one.
28.
PIN-code setting
To change PIN-code:
- turn off ignition and the system is disarmed.
-Press the valet switch 4 times.
-Turn ignition on.
-The siren will chirp 4 times.
- press override button once
- siren chirps one time
- press button of transmitter to enter first digit of PIN-code:
- 1 ,
- 2,
- 3,
- 4
- siren confirm selecting digit ( 1…4 chirps)
- press override button once
- siren chirps two times
- press button of transmitter to enter second digit of PIN-code:
- 1 ,
- 2,
- 3,
- 4
- siren confirm selecting digit ( 1…4 chirps)
After 20 sec or turning off ignition system will get out the PIN-code setting procedure, parking
lights flash 4 times.
29.
Manual arm
Turn ignition off, press override button 3 times. Then open and close all doors. System auto
arms in 10 sec with out door closing. If used manual arm mode and any zone triggered
system turn alarm mode in 20 sec delay.
30.
Turbo
timer
Turbo
timer is programmable function (feature program F-2)
Summary of Contents for TR06CC
Page 20: ...20...
