11
If start is successful. parking lights flash 3 times
Engine runs during “running time”. Then shut down automatically.
To stopping engine press button
once. Parking flash once for confirm.
Engine auto start isn’t available in case of:
- engine is running
- hood is open
- hand brake isn’t activated
- Mid-gear procedure isn’t executed (for manual gear only)
When remote start is fall, siren chirps 4 times.
34.
Learning codes of remote transmitters
There are only four transmitters may be learned in system’s memory.
Codes of learned remote transmitters will be erased each time the learning mode is activated.
To activate leaning codes mode:
-Turn the ignition on, off, on, off and leave on.
The siren will chirp.
-Press and hold the Valet/Override switch.
The siren will chirp 3 times.
-Release the Valet/Override switch.
- press button
of first remote transmitter
- siren chirps and remote transmitter beeps once
- press button
of second remote transmitter
- siren chirps and remote transmitter beeps two times
- press button
of third remote transmitter
- siren chirps and remote transmitter beeps 3 times
- press button
of fourth remote transmitter
- siren chirps and remote transmitter beeps 4 times
After 20 sec or turning off ignition system will get out the transmitter learning procedure, The
siren will chirp 3 times.
Summary of Contents for TR06CC
Page 20: ...20...
