Charge Port Light
•
WHITE (OR LIGHT BLUE):
The charge port door is
open. Model X is ready to charge and the connector
is not inserted, or the charge port latch is unlocked
and the connector is ready to be removed.
•
BLUE:
Model X detects that a connector has been
plugged in.
•
BLINKING BLUE:
Model X is communicating with the
connector. Either Model X is preparing to charge, or a
charging session is scheduled to begin at a specified
future time.
•
BLINKING GREEN:
Charging is in progress. As
Model X approaches a full charge, the frequency of
the blinking slows.
•
SOLID GREEN:
Charging is complete.
•
SOLID AMBER:
The connector is not fully plugged in.
Realign the connector to the charge port and insert
fully.
•
BLINKING AMBER:
Model X is charging at a reduced
current (AC charging only).
•
RED:
A fault is detected and charging has stopped.
Check the instrument panel or touchscreen for an
alert.
Charging Status
Charging status displays on the instrument panel when the charge port door is open.
1. Driving distance: Displays the total estimated driving distance or energy percentage (depending on your display
setting) available.
NOTE:
To change how energy units are displayed, touch
Controls
>
Display
>
Energy Display
.
2. Charge status: Charge status messages (such as Supercharging, Scheduled Charging) display here (see
Scheduled Charging and Scheduled Departure on page 176
3. Time remaining: The estimated time remaining to charge to your set limit (see
).
NOTE:
When charging to 100%, the vehicle may continue to charge with low power when charging is displayed as
complete. This is expected operation. Because the added energy beyond this point is low, it is usually not
beneficial to continue charging.
4. Charging rate: The maximum current available from the attached charge cable.
5. Range gained: Estimated increase in driving distance achieved in the charging session.
6. Charging: The current power of the charger.
Charging Instructions
174
MODEL X Owner's Manual
