WARNING:
For vehicles with third row seats, when
a child is seated in a second row monopost seat,
the setting for the button that moves a second row
outboard seat forward for easy access into the
third row should be OFF (touch
Controls
>
Seats
>
Easy Entry
). This ensures that you need to
manually hold the button to move the seat,
preventing a child seated in the second row from
being pushed against the corresponding front
seat. See
Accessing Third Row Seats (if equipped)
.
To install a ISOFIX child safety seat, slide the safety seat
latches onto the anchor bars until they click into place.
Carefully read and follow the instructions provided by
the child safety seat manufacturer.
Bench Seats
Monopost Seats
Once installed, test the security of the installation before
seating a child. Attempt to twist the child safety seat
from side to side and try to pull it away from the seat,
then check to ensure the anchors remain securely in
place.
NOTE:
Lower ISOFIX anchors should not be used with
child seats or booster seats that have an integrated
safety belt in situations where the combined weight of
the child plus the child safety seat is more than 29.5 kg.
In these situations, use the seat belt instead.
Attaching Upper Tether Straps
If an upper tether strap is provided, attach its hook to
the anchor point located on the back of the second and
third row (if equipped) seats.
NOTE:
The location of anchor points may not be readily
visible but can be found by identifying a slice in the
seat's material.
WARNING:
Tighten upper tether straps according
to the instructions provided by the manufacturer
of the child safety seat.
WARNING:
USE ONLY SEAT BELT RETAINED
CHILD SAFETY SEATS IN THE CENTER SEATING
POSITION.
For dual-strap tethers, position a strap on each side of
the head restraint.
Child Safety Seats
40
MODEL X Owner's Manual
