Tesla WT8C60M, User Manual

Page: 11 / 64

11
ENG
WARNING!
• Empty the water container after each use, the program will be paused and the Full LED icon will light if the
water container is full during the drying process. After the container is emptied, the dryer can be restarted
by pressing [Start/Pause] button.
• Do not drink the condensate water.
• Do not use the dryer without the water container
Clean the filter door
1. Open the door.
2. Take out the filter door.
3. Clean the filter door; wipe off the scrap threads
accumulated on the filter door.
4. Reinstall the filter door.
Clean filter base
1. Open the cover.
2. Unscrew both locking levers towards each other.
3. Clean the filter base completely.
4. Re-insert the filter base!
5. Screw both locking levers.
6. Close the cover until it locks into position
NOTE
• The fluff accumulated on the filter will block the air
circulation, which will cause the extension of drying
time and energy consumption.
• Do disconnect the power cord before cleaning!
• Do not operate the dryer without the filter!
• Clean the filter after each use to prevent lint
accumulation inside the dryer.
Clean heat exchanger
• As necessary, approx., once every 2 months, remove the fluff
from the heat exchanger using the sponge or soft brush.
• When doing this, please use gloves.
NOTE
• The fluff can be removed more easily if it is first dampened.
Wash air condenser
Leave the dryer to cool down.
Residual water may escape, place an absorbent cloth under the maintenance cover.
1. Unlock the maintenance cover.
2. Completely open maintenance cover.
3. Screw both locking levers towards each other.
4. Pool out the air condenser.
5. Clean the air condenser completely, drain thoroughly.
6. Clean the seals.
7. Re-insert the air condenser, handle at the button!
Filter
door
Locking
lever
Filter
base
Maintenance cover