Tesla WT8C60M, User Manual

Page: 12 / 64

12
ENG
8. Unscrew both locking levers.
9. Cloth the maintenance cover until it locks into position. Please clean the
air condenser approx., once every 3 months if frequently used.
Do not damage the air condenser!
WARNING!
• Clean with water only; do not use hard/sharp-edged objects!
• Do not operate the dryer without the air condenser!
• During drying, water may collect between the window and the seal, but
this does not affect the function of your dryer!
Troubleshooting
Display Reason Solutions
"Full" LED on permanently
Container Is full Empty container
Water pump failure or water level
sensor failure
Please contact your local service
center if the problem persists
Child Lock + 9h Temperature sensor error
Child Lock + 6h Humidity sensor error
Child Lock + 3h Heating problem
WARNING!
• Only authorized technicians can carry out repairs.
• Before you call service, please check if you have dealt with the fault yourself or if you have followed the
user instructions.
• A technician will charge you for advice, even during the warranty period.
Problem Solution
Working state LED not on
The mains plug is inserted.
Check the program selected.
Check fuse in the house.
"Full" LED on permanently
Empty condensation container.
If failure, check hose for condensation outlet.
Dryer does not start
Check the start button has selected .
Check the the door has closed.
Check the program has set.
Water is running out
Align dryer horizontally.
Clear air condenser and door seals.
Door is open by itself
Press door until it “dicks”into position.
Check the clothes are over load .
Humidity in the room is increase
significantly
Ventilate room adequately.
Clean the cool grille.
Ensure that the air condenser has been inserted.