Tesla TA22FFUL-07410IA, Operating Instruction

Page: 50 / 56

50
ENG
Recovery :
1. The clearance of refrigerants in the system is required when repairing or scrapping the appliance. It is
recommended to completely remove the refrigerant.
2. Only a special refrigerant tank can be used when loading the refrigerant into the storage tank. Make sure the
capacity of the tank is appropriate to the refrigerant injection quantity in the entire system. All tanks intended to
be used for the recovery of refrigerants should have a refrigerant identification (i.e. refrigerant recovery tank).
Storage tanks should be equipped with pressure relief valves and globe valves and they should be in a good
condition. If possible, empty tanks should be evacuated and maintained at room temperature before use.
3. The recovery equipment should be kept in a good working condition and equipped with equipment operating
instructions for easy access. The equipment should be suitable for the recovery of R32 refrigerants. Besides,
there should be a qualified weighting apparatus which can be normally used. The hose should be linked with
detachable connection joint of zero leakage rate and be kept in a good condition. Before using the recovery
equipment, check if it is in a good condition and if it gets perfect maintenance. Check if II electrical components
are sealed to prevent the leakage of the refrigerant and the fire caused by it. If you have any question, please
consult the manufacturer.
4. The recovered refrigerant shall be loaded in the appropriate storage tanks, attached with a transporting
instruction, and returned to the refrigerant manufacturer. Don’t mix refrigerant in recovery equipment, especially
a storage tank.
5. The space loading R32 refrigeration can’t be enclosed in the process of transportation. Take anti electrostatic
measures if necessary in transportation. In the process of transport, loading and unloading, necessary protective
measures must be taken to protect the air conditioner to ensure that the air conditioner is not damaged.
6. When removing the compressor or clearing the compressor oil, make sure the compressor is pumped to an
appropriate level to ensure that there is no residual R32 refrigerants in the lubricating oil. The vacuum pumping
should be carried out before the compressor is returned to the supplier. Ensure the safety when discharging oil
from the system.
REMOTE CONTROLLER INSTRUCTIONS
Attention
• Read this “instructions” carefully so that you can use the air-conditioner safely and correctly.
• Take good care of the “instructions” so that it can be referred to at any time.
1. Aim the remote controller towards the receiver on the airconditioner.
2. The remote controller should be within 8 meters away from the receiver.
3. No obstacles between the remote controller and receiver.
4. Do not drop or throw the remote controller.
5. Do not put the remote controller under the forceful sun rays or heating facilities and other heating sources.
6. Use two 7# batteries, do not use the electric batteries.
7. Take the batteries out of remote controller before stop its using for long.
8. When the noise of transmitting signal can’t be heard indoor unit or the transmission symbol on the display
screen doesn’t flare, batteries need be replaced.
9. If reset phenomenon occurs on pressing the button of the remote controller, the electric quantity is deficient
and new batteries need to be substituted.
10. The waste battery should be disposed properly.
Note :
• The picture is general remote controller, contains almost all of the function buttons. They may be slightly
different from material abject(depend on model).
• All the figures above are the displays after being initially electrified or re-electrified after power off. In actual
operations, the remote controller screen displays related items only.
• The cooling only units don’t have the function of heating or electric heating. When the remote controller turns to
such function buttons, the units will not result such effect. Please don’t turn the remote controller to such buttons.