![background image](http://html1.mh-extra.com/html/tesla/model-3-2020/model-3-2020_owners-manual_1091146079.webp)
Braking Systems
WARNING:
Properly functioning
braking systems are critical to ensure
safety. If you experience a problem
with the brake pedal, brake caliper, or
any component of a Model 3 braking
system, contact Tesla immediately.
Model 3 has an anti-lock braking system
(ABS) that prevents the wheels from locking
when you apply maximum brake pressure.
This improves steering control during heavy
braking in most road conditions.
During emergency braking conditions, the
ABS constantly monitors the speed of each
wheel and varies the brake pressure
according to the grip available.
The alteration of brake pressure can be felt as
a pulsing sensation through the brake pedal.
This demonstrates that the ABS is operating
and is not a cause for concern. Keep firm and
steady pressure on the brake pedal while
experiencing the pulsing.
The ABS indicator briefly
flashes yellow on the
touchscreen when you
first start Model 3. If this
indicator lights up at any
other time, an ABS fault
has occurred and the ABS
is not operating. Contact
Tesla. The braking system
remains fully operational
and is not affected by an
ABS failure. However,
braking distances may
increase. Drive cautiously
and avoid heavy braking.
If the touchscreen displays
this red brake indicator at
any time other than briefly
when you first start Model
3, a brake system fault is
detected, or the level of
the brake fluid is low.
Contact Tesla immediately.
Apply steady pressure and
keep the brakes firm to
bring the vehicle to a stop
when safe to do so.
Emergency Braking
In an emergency, fully press the brake pedal
and maintain firm pressure, even on low
traction surfaces. The ABS varies the braking
pressure to each wheel according to the
amount of traction available. This prevents
wheels from locking and ensures that you
stop as safely as possible.
WARNING:
Do not pump the brake
pedal. Doing so interrupts operation
of the ABS and can increase braking
distance.
WARNING:
Always maintain a safe
distance from the vehicle in front of
you and be aware of hazardous
driving conditions. While the ABS can
improve stopping distance, it cannot
overcome the laws of physics. It also
does not prevent the danger of
hydroplaning (where a layer of water
prevents direct contact between the
tires and the road).
Automatic Emergency Braking is designed to
automatically brake in situations where a
collision is considered imminent (see
Automatic Emergency Braking on page 140
WARNING:
Automatic Emergency
Braking is not designed to prevent a
collision. At best, it can minimize the
impact of a frontal collision by
attempting to reduce your driving
speed. Depending on Automatic
Emergency Braking to avoid a collision
can result in serious injury or death.
CAUTION:
In emergency situations, if
the brakes are not functioning
properly, press and hold the Park
button on the gear selector to bring
the vehicle to a stop. Do not use this
method to stop the vehicle unless
absolutely necessary.
Dynamic Brake Lights
If you are driving over 50 km/h and brake
forcefully (or if Automatic Emergency Braking
engages), the brake lights flash quickly to
warn other drivers that Model 3 is rapidly
slowing down. If Model 3 stops completely,
the hazard warning lights flash. Flashing
continues until you press the accelerator or
manually press the button to turn them off
(see
Hazard Warning Flashers on page 71
).
Braking and Stopping
77
Driving
Summary of Contents for MODEL 3 2020
