To install an aero cover:
1. Align the aero cover into position so that
the notch at the base of the Tesla "T" is
aligned with the tire's valve stem.
2. Push firmly around the perimeter of the
aero cover until it fully snaps into place.
CAUTION:
Make sure the aero cover
is fully secure before driving to
prevent it from falling off.
Removing and Installing Lug Nut
Covers
If your Model 3 is equipped with lug nut
covers, you must remove them to access the
lug nuts.
To remove a lug nut cover:
1. Insert the curved part of the lug nut cover
tool (located in the glovebox for some
vehicles, or you can use a small allen
wrench) into the hole at the base of the
Tesla "T.
NOTE:
The lug nut cover tool can also be
purchased at an auto parts store or through
online retailers.
2. Maneuver the lug nut cover tool so that it
is fully inserted into the hole in the lug nut
cover.
3. Twist the lug nut cover tool so that the
curved part is touching the middle of the
lug nut cover.
4. Firmly pull the lug nut tool away from
the wheel until the lug nut cover is
released.
To install the lug nut cover:
1. Align the lug nut cover into position.
2. Push firmly on the lug nut cover until it
fully snaps into place.
CAUTION:
Make sure the lug nut
cover is fully secure before driving
to prevent it from falling off.
Tire Care and Maintenance
204
MODEL 3 OWNER'S MANUAL
Summary of Contents for MODEL 3 2020
