CAUTION:
Read and observe the
instructions and warnings provided by
WD-40 prior to performing this
procedure.
To apply WD-40 to the door handle pivot pin:
1.
Open the door handle and prop it open
using a folded towel or other soft material.
2.
Attach the provided straw to the nozzle of
the WD-40 bottle.
3.
Put on eye protection.
4.
Place the end of the straw next to the pivot
pin and spray it for approximately one
second, taking care not to accidentally
spray other components.
NOTE:
Rest the end of the straw on the top
of the spring around the pivot pin to better
aim the spray.
WARNING:
Make sure eye
protection is worn when performing
this step.
5.
Remove the towel or other soft material
used to prop the door handle open.
6.
Pivot the door handle in and out
approximately ten times.
7.
For a second time, place the end of the
straw next to the pivot pin and spray it for
approximately one second, taking care not
to accidentally spray other components.
NOTE:
Rest the end of the straw on the top
of the spring around the pivot pin to better
aim the spray.
8.
Remove the towel or other soft material
used to prop the door handle open.
9.
Pivot the door handle in and out
approximately ten times.
10.
Perform this procedure on the other three
door handles.
Cold Weather Best Practices
107
Driving
Summary of Contents for MODEL 3 2020
