![background image](http://html.mh-extra.com/html/tesla/bo300sx/bo300sx_user-manual_1091413004.webp)
4
ENG
30. After each use, check if the unit is turned off.
31. If the appliance is faulty or has a visible damage,
do not operate the appliance.
32. Do not touch the plug with wet hands. Do not pull
the cord to plug off, always hold the plug.
33. Do not use the appliance with its front door glass
removed or broken.
34. Place the baking paper together with the food into
a pre-heated oven by putting it inside a cooker or
on an oven accessory. (tray, wire grill etc.)
35. Do not put objects that children may reach on the
appliance.
36. It is important to place the wire grill and tray
properly on the wire racks and/or correctly place
the tray on the rack. Place the grill or tray between
two rails and make sure it is balanced before
putting food on it.
37. Against the risk of touching the oven heater
elements, remove excess parts of the baking paper
that hang over from the accessory or container.
38. Never use it at higher oven temperatures than the
maximum usage temperature indicated on your
baking paper. Do not place the baking paper on
the base of the oven. Against the risk of touching
the oven heater elements, remove excess parts
of the baking paper that hang over from the
accessory or container.
39. When the door is open, do not place any heavy
object on the door or allow children to sit on it. You
may cause the oven to overturn or the door hinges
to be damaged.
40. The packaging materials are dangerous for
children. Keep packaging materials away from the
reach of children.
41. Do not use abrasive cleaners or sharp metal
scrapers to clean the glass as the scratches that
may occur on the surface of the door glass may
cause the glass to break.
42. User should not handle the oven by himself.
43. During usage, the internal and external surfaces of
the oven get hot. As you open the oven door, step
back to avoid the hot vapour coming out from the
interior. There is risk of burning.
44. Do not place heavy objects when oven door is
open, risk of toppling.
45. Oven supply can be disconnected during any
construction work at home. After completing the
work, re-connecting the oven shall be done by
authorized service.
46. User should not dislocate the resistance during
cleaning. It may cause an electric shock.
47. To prevent overheating, the appliance should not
be installed behind of a decorative cover.
48. Turn off the appliance before removing the
safeguards. After cleaning, install the safeguards
according to instructions.
49. Cable fixing point shall be protected.
50. Please don’t cook the food directly on the tray /
grid. Please put the food into or on appropriate
tools before putting them in the oven.
Electrical Safety
1. Plug the appliance in a grounded socket
protected by a fuse conforming to the values
specified in the technical specifications chart.
2. Have an authorized electrician set grounding
equipment. Our company shall not be responsible
for the damages that shall be incurred due to
using the product without grounding according to
local regulations.
3. The circuit breaker switches of the oven shall be
placed so that end user can reach them when the
oven is installed.
4. The power supply cord (the cord with plug) shall
not contact the hot parts of the appliance.
5. If the power supply cord (the cord with plug)
is damaged, this cord shall be replaced by the
manufacturer or its service agent or an equally
qualified personnel to prevent a hazardous
situation.
6. Never wash the appliance by spraying or pouring
water on it. There is a risk of electrocution.
7.
WARNING: To avoid electric shock, ensure that
the device circuit is open before changing the
lamp.
8.
WARNING: Cut off all supply circuit
connections before accessing the terminals.
9. Do not use cut or damaged cords or extension
cords other than the original cord.
10. Make sure that there is no liquid or humidity in the
outlet where the product plug is installed.
11. The rear surface of the oven also heats up when
the oven is operated. Electrical connections
shall not touch the rear surface, otherwise the
connections may be damaged.
12. Do not tighten the connecting cables to the oven
door and do not run them over hot surfaces. If the
cord melts, this may cause the oven to short circuit
and even a fire.
13. Unplug the unit during installation, maintenance,
cleaning and repair.
14. If the power supply cable is damaged, it must
be replaced by its manufacturer or authorized
technical service or any other personnel qualified
Summary of Contents for BO300SX
