![background image](http://html.mh-extra.com/html/tesla/bo300sx/bo300sx_user-manual_1091413005.webp)
5
ENG
at the same level, in order to avoid any dangerous
situation.
15. Make sure the plug is inserted firmly into wall
socket to avoid sparks.
16. Do not use steam cleaners for cleaning the
appliance, otherwise electric shock may occur.
17. An omnipolar switch capable to disconnect
power supply is required for installation.
Disconnection from power supply shall be
provided with a switch or an integrated fuse
installed on fixed power supply according to
building code.
18. Appliance is equipped with a
type ‘’Y’’
cord
cable.
19. Fixed connections shall be connected to a power
supply enabling omnipolar disconnection. For
appliances with over voltage category below III,
disconnection device shall be connected to fixed
power supply according to wiring code.
Intended Use
1. This product has been designed for domestic use.
Commercial use is not permitted.
2. This appliance may only be used for cooking
purposes. It shall not be used for other purposes
like heating a room.
3. This appliance shall not be used to heat plates
under the grill, drying clothes or towels by
hanging them on the handle or for heating
purposes.
4. The manufacturer assumes no responsibility for
any damage due to misuse or mishandling.
5. Oven part of the unit may be used for thawing,
roasting, frying and grilling food.
6. Operational life of the product you have
purchased is 10 years. This is the period for
which the spare parts required for the operation
of this product as defined is provided by the
manufacturer.
Electrical Connection
This oven must be installed and connected to its place
correctly according to manufacturer instructions and by
an authorized service.
Appliance must be installed in an oven enclosure
providing high ventilation.
Electrical connections of the appliance must be
made only via sockets having earth system furnished
in compliance with rules. Contact an authorized
electrician if there is no socket complying with the
earthed system at where appliance will be placed.
Manufacturing company is by no means responsible
for damage resulting from connection of
non-earthed sockets to appliance.
Plug of your oven must be earthed; ensure that socket
for the plug is earthed. Plug must be located in a place
that can be accessed after installation.
Your oven has been manufactured as 220-240 V
50/60 Hz. AC power supply compliant and requires
a 16 Amp fuse. If your power network is different that
these indicated values, refer to an electrician or your
authorized service.
When you need to replace the electrical fuse, please
ensure that electrical connection is made as follows:
• Phase (to live terminal) brown cable
• Blue cable to neutral terminal
• Yellow-green cable to earth terminal
Oven disconnecting switches must be in an accessible
place for final user while oven is in its place.
Power supply cable (plug in cable) mustn’t touch hot
parts of the appliance.
If supply cord (plug in cable) is damaged, this cord
must be replaced by the importer or its service agent
or an equally competent personnel to prevent a
hazardous situation.
Summary of Contents for BO300SX
