TESI XE18PB06, Instructions For Use And Maintenance Manual

Page: 50 / 66

PORTABLE HIGH-ENERGY IGNITER
– XE18PB06 - Rev.00
49
7.5 MAINTENANCE
During the normal operation of the ignition device operator to maintain the same in good conditions, it must
perform some simple routine maintenance, as shown in
Table 7.1 - Maintenance
NR.
PR. ACTIVITY PERIODICITY REFERENCE
SECTION
1 Control of the connectors on the device. Before use 7.5.1
2 Checking the condition of the cables. Before use 7.5.2
3 Checking the battery charge. Before use in
anticipation of a
monthly or next
use (at least a
few days before)
7.5.3
4 Checking the state of the surface of the tip. In anticipation of
a future use
7.5.4
7.5.1. CONTROL CONNECTOR ON THE DEVICE
DANGER
Before any operation, make sure the charging cable is unplugged and battery is
disconnected
PROHIBITION
When cleaning, never operate the ignition button.
Visually inspect the connectors on the left and right panels are clean, there are no signs of damage and that
the contacts are clean from dirt or oxidation.
In case of obstruction of grease, tar, earth or mud, clean them.
7.5.2. CHECKING THE CONDITION OF THE CABLES SUPPLIED
DANGER
Before any operation, make sure the charging cable is unplugged and battery is
disconnected
PROHIBITION
When cleaning, never operate the ignition button.