
PORTABLE HIGH-ENERGY IGNITER
– XE18PB06 - Rev.00
33
be absolutely avoided, therefore also smoking is forbidden.
Don’t use any flammable fluids during the cleaning operations.
The maintenance must be carried out by Ignition device turned off, after having disconnected the terminals
from the battery and after having removed the charge cable from igniter.
A scarce communication level can lead to accidents. If one or more persons are working on the ignition
device, make sure that each of them is informed about the work the other ones are performing. By not
adopting the above mentioned precautions, the possibility is left open to very serious accidents and even
to death.
By not constantly wearing the adequate garments, there is still the possibility of serious accidents: fluttering
garments can get caught into machine parts. Always wear the adequate protective garments, complying
with the kind of work you are performing, as, for example: helmet, safety shoes, protective glasses, prop-
erly-sized overalls, ears-
protections and gloves for industrial use; button the cuffs, don’t wear ties or
scarves and keep long hair dressed in a pony-tail.
Gaskets and O-Rings incorrectly mounted, damaged or worn out can provoke leaks and accidents: if not
otherwise established, immediately replace the damaged components. Don’t use either trichloroethylene or
thinners for paints near the O-Rings and the gaskets.
Some gaskets or oil seals may contain elastomeric material like Viton, Fluorel and Technoflon. The elas-
tomeric materials exposed to high temperature can produce highly corrosive acids.
WARNING
The acids produced from elastomeric materials subjected to high temperatures can cause
serious scalds.
The new components kept at ambient temperature can be handled without any particular precaution.
The elastomeric components which were exposed to 300°C temperatures don’t need to be handled with
any special precautions. If there are some marks of decomposition (for example, burnings), get referred to
Paragraph 3.3 "Emergency behaviours".
PROHIBITION
Don’t touch either the component or the surrounding area.
CAUTION
It is here pointed out that, inside the High Energy Igniter there are some materials which,
if dispersed in the environment, can create serious ecological damages (for example,
battery, capacitor, electronic board, etc.).
It is reminded that the collection and the elimination of the above enlisted components
are regulated by relevant laws.
Deliver all the above mentioned residuals to the authorized collecting centres.
It is severely forbidden to get rid of the residuals by deposing them in abusive dumps or,
even worse, by discharging them into the rivers or into the sewerage.
The relevant laws in force, exactly defined for every country, foresee heavy penalties for
the transgressors.
TESI s.r.l. decline every responsibility in case the here enlisted safety and use
instructions shouldn’t be strictly observed.
Summary of Contents for XE18PB06
