TESA-hite 400 / 700
4.9 MODE 2 Measuring lengths in two directions, with probe constant
Measuring with inversion of gauge-head direction (Mode St 2)
FLAT SURFACES CYLINDRICAL SURFACES
h1
b1
h3
h2
b2
Ø 2
Ø 1
h3
h2
h1
External
dimensions
Internal
dimensions
6.3500 mm
.25000 in
2
1
4
3
Important
To ensure optimum instrument measuring accuracy, the standard probe-fixing arm
(N° 00760143) must be aligned on the working surface with the air cushion deactivated.
The accessory N° 00760225 can be used to do this alignment.
Automatic Print
Available after switch-on
Changing the
Dimension of
the setting piece
If the reading dispersion is too
great, the display indicates: Deviation not accepted,
Accept with resolution adapted
recalibrate
as follows:
5 ÷ 10µm 0.01 mm
.0002 ÷ .0005 in .0005 in
10 ÷ 50µm 0.1 mm
.0005 ÷ .002 in .005 in
> 50µm 1 mm
> .002 in .05 in
20
