TESA-hite 400 / 700
2.2 Starting the instrument
After the instrument is turned on (ON/OFF), a double bar appears on the screen (Fig.2.1)
mm
mm
Fig.2.1
Fig.2.2
To enter in the measuring mode, move slowly the measuring head at a certain distance until the
2 triangles appear (Fig.2.2); then the movement can be done faster until the reference mark has
been crossed.
After having crossed the reference, the TESA-Hite 400 / 700 is in the measuring mode and the
following display appears:
Switch-on auto Print mode
Establish
the
probe
constant
Enter
in
ZZ
mode
Introduction
of
a
PRESET
mm
For more detailed information on the probing procedure for taking readings, please consult the
chapter 4.
Remark:
By turned on, if first the F1, then the F1 and ON/OFF keys are simultaneously activated; after
deactivate the ON/OFF and then the F1 keys; the instrument will go in the configurations menu. For
further information about it, please consult the chapter 5.
6
