TESA-hite 400 / 700
4.12 PRESET function
The purpose of the PRESET function is to enter a value corresponding to the distance from the point
of contact when reading the reference and the real reference. For example, when the base plate is the
reference but it is not directly on that plate that you want to measure. In this case, you use a standard
gauge block and enter its measurement as PRESET.
Thenceforth, probing the reference can be done on the shim itself.
Mode 1 : 1x
Mode 2 : 2x
+
—
Indirect
reference
point
mm
« PRESET » function Mode 1 and 2
Choice:
Choice:
Shift one position to the left
Confirm preselected reading
Cancel preselected reading
mm
« PRESET » function : Sample entry -50.145 mm
1
29
