TESA Power Panel Plus M 00760220 Instruction Manual Download Page 23

Page: 23 / 164

POWER PANEL

plus

N° ME07.99077

B. Vuille

Reference value will be equal to the mean value obtained from the two probe
contacts.

Examples
1

By activating either of these function keys

either of the following actions will happen:
– If neither keys for

fast displacement

is pressed within less than 2 seconds, TESA

Micro-Hite plus M will repeat the same function at the same location.

– If either of the keys for

fast displacement

is pressed within less than 3 seconds,

you’ll be able to select one of the 6 measuring functions available for probing
another point.

– If the rotary power control is used to move the probe insert, TESA Micro-Hite plus

M will repeat the same function at the new location.

In either case, the reference value will match the average of both probe contacts.

By activating either of these function keys

the reference value will be taken at the centre of the part feature to be measured.

Value capture at the centre of a groove (example)

Summary of Contents for Power Panel Plus M 00760220





































































































































































Search results

Summary of Contents for Power Panel Plus M 00760220

Reviews:

Related manuals for Power Panel Plus M 00760220

Brands by name

Popular brands

TESA Power Panel Plus M 00760220, Instruction Manual

Search results

Summary of Contents for Power Panel Plus M 00760220

Reviews:

Related manuals for Power Panel Plus M 00760220

Brands by name

Popular brands