TESA CLINOBEVEL 2, Instruction Manual

Page: 31 / 44

ENTER
ENTER
ZERO/SELECT
ON/MODE
3 x
31
9 aDDeD funCtions
9.1 Interrupting a measurement operation or a configuring run
9.2 Altering or cancelling a correction value
– SEND/ESC » allows you to stop the operation your are currently performing (e.g. dis-
play setting or value input) at any time. Once this key has been pressed, the inclino-
meter returns to the active function.
You have the possibility to change or cancel any correction value stored in the memory when measu-
ring in either mode « ZERO » or « REL ZERO ». Example: cancelling the ZERO-OFFSET value of 9°00’00
” (chapter 6.2).
Procedure for delete stored correction values REL ZERO OFFSET (PRESET):
Function Key Display
Function
« Changing correction
values »
CLINOBEVEL 2 is ready to
continue measuring
Initiate
ZERO-OFFSET function
Display
shows correction value
stored in the memory
Delete the stored value,
reset to 0°00’00 ”
Confirm