11
Temporary zero-setting based on a given correction value (angle
α
) with reference to the initial
setting
(ZERO-OFFSET function) (See chapter 6.5)
– Function mode «
REL ZERO
»
Temporary display setting to zero based on a given reference surface
(See chapter 6.6)
– Function mode «
REL ZERO
»
Notes:
– The initial display setting based on the centre of
gravity allows a temporary zero set in any angular
position.
– Any initial (zero) set stored in the memory
remains unchanged.
Notes:
– The reference against the centre of gravity is
ignored.
– Any initial (zero) set stored in the memory
remains unchanged.
– Function mode «
ABSOLUTE
»
Absolute zero point setting by rotary measurement
This setting is based on a stable, highly reliable
and moreover, free of charge measuring base
– the centre of the earth. Gravitation is used to
measure the position of the pendulum against
the measuring faces mounted on the instrument
body.
6.2 Initial display setting on the centre of gravity through a reverse measurement
For this operation, two measurements are taken
at the same spot but in opposite di-rections
whilst display is being set. This is called a « re-
verse measurement ».
Summary of Contents for CLINOBEVEL 2
