4
Fitting the jacks on the chassis frame
Please fit the front jacks in converse tipping direction to the rear in order to get the best stability,
if possible.
Fit every jack with 4 screws and nuts on the frame like shown in the picture, also in case of using
adapters.
Choosing fitting points
In difficult conditions the jacks con be welded with adapters.
In vertical position of the jacks the space between foot and floor must be 30 mm at
least.*
Control the required space of the jack. No obstacles in the course!**
*
Delivered length can be extended (see following chapter)
**
The travel of the jack can be modified (see chapter adjusting limit switches)
Drills for fitting
35 mm min.
Summary of Contents for Auto lift system
Page 21: ......