12
Programming the remote control
The remote control is factory-provided pre-programmed and saved in the control unit. Complete
this chapter only in case of changing the remote control.
1.
Switch off the system. Press and hold at once
START
and
ON/OFF
on the panel.
Don’t release the buttons.
2.
Press
START
on the remote control. 2 beeps confirm the saving. Wait 2 seconds and press
AUTO
on the remote control. Again you get 2 beeps. Wait again 2 seconds and press
GET UP
on the remote control, again you will hear 2 beeps.
3.
Release the buttons
START
and
ON/OFF
on the panel.
Press and hold at once
START AUTO GET-UP
Press one after another
START – AUTO – GET-UP
Summary of Contents for Auto lift system
Page 21: ......
