User Manual for David30 GNSS Receiver v2.0
49
4. The update is successful is shown in the figure below.
Figure 3.13 Firmware update successful interface
5. Click [OK] and [Finish] to close the firmware update window. The receiver
would reset automatically.
6. After the David30 receiver is boot up, the current firmware version can be
checked in Tersus GNSS Center by typing ‘LOG VERSION’ in the
command area, and in Nuwa app by clicking [Device] -> [Device Info].
Note
:
There is Advance Setting option in the firmware update window, if a David30
receiver
cannot boot up successfully, or
cannot work well after boot up, or
cannot finish firmware update successfully according to the above steps,
[Advance Setting] option can be selected to start FW update again.