User Manual for David30 GNSS Receiver v2.0
71
Figure 6.5 Rover is receiving RTK corrections
The detailed steps of configuring David30 using Tersus GNSS Center via
cables are listed below:
1) Use the ‘COMM2-7pin to USB&DB9 cable’ to connect the COMM2 cable
and a computer; or Use the ‘COMM1-7pin to DB9 cable’ to connect the
COMM1 cable and a computer ; the ‘COMM1-7pin to DB9 cable’ shown as
below:
2) Open Tersus GNSS Center application on the computer and type below
commands in the command window:
UNLOGALL
//remove all logs
FIX NONE
//cancel the fixed coordinate of a base station